Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Tips 2: Screw And A Hammer
Step 1:
Take a long spiral screw, use a screwdriver and a hammer. Use long wood screws or sheet metal screws. Try to find a spiral cone that is roughly the same length as the worm (coiled part) on the spiral cone - you'll want a decent amount of spiral cone, but enough at the top to hold the tool.
Step 2:
Screw the screw into the center of the cork. If the cork is soft, use your hands to gently turn the screw. If the cork is hard-wearing, use a screwdriver, but use gentle pressure to avoid pushing the cork into the neck. If the cork starts to slip, stop turning and use a knife to drill a hole in the screw so the screw can slide in more easily.
For better pulling, insert the screw into the cork to a depth of about 0.5 inches (1.3 cm).
Try to leave at least half of the screw exposed at the top of the cork to avoid digging in too deep. Avoid twisting all the way from the bottom of the cork.
Step 3:
Use the claws of the hammer to grasp the exposed part of the screw. Slide the clamp underneath the screw head until the screw is close to the clamp connector.
If there aren't enough exposed screws to get a good grip, loosen it slightly until there is enough space.
Alternatively, use pliers to secure the screws instead of a hammer.
Step 4:
Hit the bottle with a hammer and remove the cork. Press the handle of the hammer down like you would a Wine Key. Try to pull the cork out quickly (more attempts may make it more likely to break).
If the pry hammer doesn't work, or it looks like the cork might break, pull straight up.
If you are using pliers, pull up on the screw. Trying to pry the pliers with the side of the handle against the bottle can be awkward.
If the hammer or pliers cannot remove all of the cork, use your fingers to grasp the screw or cork and pull the cork out.
February 28, 2024
December 15, 2022
January 02, 2024
March 28, 2023
March 02, 2024
February 21, 2024
1. To open a bottle of wine without a corkscrew, you will need a flat, non-serrated knife that is thin enough to fit in the neck of the bottle. Choose a sharp knife that can easily push into the cork...
Tilt the corkscrew 45 degrees. If the cork left in the neck is large and fairly close to the opening, try using the corkscrew again. Don't drill the long curled section straight out of the middle,...
Email to this supplier
February 28, 2024
December 15, 2022
January 02, 2024
March 28, 2023
March 02, 2024
February 21, 2024
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.